Details

---

BUY OP279GS https://www.utsource.net/itm/p/11251010.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.7	-	5.5	V	-
Supply Current	ICC	-	160	-	μA	Quiescent current
Input Offset Voltage	VOS	-	10	-	μV	Maximum at 25°C
Input Bias Current	IB	-	2	-	pA	Maximum at 25°C
Input Voltage Range	VIN	0	-	VCC-1.5	V	Common-mode input voltage range
Output Voltage Swing	VOUT	0	-	VCC-1.5	V	Output voltage swing into 10 kΩ load
Slew Rate	SR	-	0.5	-	V/μs	-
Bandwidth (Small Signal)	fT	-	1.3	-	MHz	-
Gain-Bandwidth Product	GBW	-	1.3	-	MHz	-
CMRR	CMRR	-	100	-	dB	Minimum at 1 kHz
PSRR	PSRR	-	100	-	dB	Minimum at 1 kHz
Output Impedance	ZOUT	-	25	-	Ω	At 1 kHz
Operating Temperature	TOP	-40	-	85	°C	-

Instructions for Use:

1. Power Supply:

   • The OP279GS can operate from a single supply ranging from 2.7V to 5.5V.
   • Ensure the power supply is stable and clean to avoid noise and instability.

2. Input Configuration:

   • The common-mode input voltage range is from 0V to V_CC - 1.5V.
   • Avoid exceeding these limits to prevent damage or incorrect operation.

3. Output Configuration:

   • The output voltage swing is from 0V to V_CC - 1.5V when driving a 10 kΩ load.
   • For loads with lower impedance, the output swing may be reduced.

4. Biasing:

   • The input bias current is very low (2 pA typical), making it suitable for high-impedance sources.
   • Ensure that the input bias current does not cause significant errors in your circuit.

5. Stability:

   • The OP279GS is unity-gain stable and can be used in configurations from unity gain upwards.
   • For higher gains, ensure proper compensation to maintain stability.

6. Temperature Considerations:

   • The operating temperature range is from -40°C to 85°C.
   • Performance parameters may vary slightly over temperature; refer to the datasheet for detailed specifications.

7. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper ESD precautions during assembly and handling.

8. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow recommended storage conditions as specified in the datasheet.

For more detailed information, refer to the full datasheet of the OP279GS.

(For reference only)