Details

---

BUY K9K8G08U0E-SIB0 https://www.utsource.net/itm/p/11251880.html

Parameter	Description	Value
Device Type	NAND Flash Memory
Density	Storage Density	1 Gb (128 MB)
Organization	Internal Organization	16M x 8
Vcc Supply Voltage	Operating Voltage Range	2.7 V to 3.6 V
I/O Voltage	Input/Output Voltage Range	1.7 V to 3.6 V
Data Bus Width	Data Bus Width	8 bits
Access Time	Page Read Access Time	50 ns
Program Time	Page Program Time	200 μs
Erase Time	Block Erase Time	2 ms
Endurance	Program/Erase Cycles per Block	100,000 cycles
Retention	Data Retention at 25°C	10 years
Operating Temperature	Industrial Temperature Range	-40°C to +85°C
Package	Package Type	BGA
Pin Count	Number of Pins	48
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use

1. Power Supply:

   • Connect the Vcc supply voltage to the specified range (2.7 V to 3.6 V).
   • Ensure the I/O voltage is within the range of 1.7 V to 3.6 V.

2. Initialization:

   • Apply the reset signal to initialize the device.
   • Set the appropriate command sequence to configure the device for operation.

3. Read Operation:

   • Send the read command to the device.
   • Provide the address of the page to be read.
   • Wait for the access time (50 ns) before reading the data.

4. Write Operation:

   • Send the program command to the device.
   • Provide the address of the page to be programmed.
   • Write the data to the device.
   • Wait for the program time (200 μs) to complete.

5. Erase Operation:

   • Send the erase command to the device.
   • Provide the address of the block to be erased.
   • Wait for the erase time (2 ms) to complete.

6. Error Handling:

   • Monitor the status register for any errors during read, write, or erase operations.
   • Implement error correction mechanisms as necessary.

7. Environmental Conditions:

   • Ensure the operating temperature remains within the industrial range (-40°C to +85°C).
   • Store the device in a dry environment to prevent moisture damage.

8. Handling:

   • Handle the device with care to avoid static discharge.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

For detailed programming sequences and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)