Details

---

BUY MJD41C https://www.utsource.net/itm/p/11252316.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	80	V
Collector-Base Voltage	VCB	-	-	80	V
Emitter-Base Voltage	VEB	-	-	5	V
Continuous Collector Current	IC	-	-	3	A
Collector-Emitter Saturation Voltage	VCE(sat)	0.6	1.2	2.0	V
Base-Emitter Saturation Voltage	VBE(sat)	1.2	1.8	2.5	V
Storage Temperature Range	Tstg	-55	-	150	掳C
Operating Junction Temperature	TJ	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure that the transistor is mounted on a suitable heatsink if it will be operating at high power levels.
   • Use thermal grease to improve heat transfer between the transistor and the heatsink.

2. Biasing:

   • The base-emitter junction should be forward-biased with a current-limiting resistor to prevent excessive base current.
   • Ensure that the base current (I_B) is sufficient to keep the transistor in saturation when required.

3. Overvoltage Protection:

   • Use a Zener diode or other overvoltage protection circuits to protect the transistor from voltage spikes.

4. Current Limiting:

   • Use a series resistor or current-limiting circuit to ensure that the collector current (I_C) does not exceed the maximum rating of 3A.

5. Temperature Considerations:

   • Monitor the junction temperature (T_J) to ensure it remains within the specified range (-55掳C to 150掳C).
   • Avoid operating the transistor in environments where the ambient temperature exceeds the storage temperature range (-55掳C to 150掳C).

6. Handling:

   • Handle the transistor with care to avoid damage to the leads or the semiconductor material.
   • Use anti-static precautions to prevent damage from electrostatic discharge (ESD).

7. Testing:

   • Test the transistor using a multimeter or a dedicated transistor tester to ensure it is functioning correctly before installation.
   • Verify the continuity and resistance values of the leads to ensure proper functionality.

8. Storage:

   • Store the transistor in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the transistor in its original packaging until ready for use to protect it from moisture and static electricity.

(For reference only)