Details

---

BUY STB6NK60Z https://www.utsource.net/itm/p/11255075.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Maximum Drain Voltage	VDSS	-	600	-	V
Maximum Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	6	-	A	@ Tc=25掳C
Pulse Drain Current	Ipp	-	18	-	A	@ Tc=25掳C, tp=10渭s, Duty Cycle=1%
Gate Threshold Voltage	VGS(th)	2	4	6	V	@ ID=250渭A, Tc=25掳C
On-State Resistance	RDS(on)	0.7	-	1.1	惟	@ VGS=10V, ID=6A, Tc=25掳C
Total Power Dissipation	PD	-	180	-	W	@ Tc=25掳C
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • The STB6NK60Z is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection.
   • Avoid exceeding the maximum ratings specified in the table to prevent damage to the device.

2. Mounting and Assembly:

   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Use a suitable heatsink if the device will operate at high power levels or in high ambient temperatures.
   • Apply thermal paste between the device and the heatsink for better heat dissipation.

3. Operating Conditions:

   • The device is designed for high-frequency switching applications. Ensure that the switching frequency and duty cycle are within the recommended operating conditions.
   • Monitor the junction temperature to ensure it does not exceed the maximum rated temperature.

4. Gate Drive:

   • The gate threshold voltage (VGS(th)) is critical for turning the device on. Ensure that the gate drive voltage is sufficient to fully turn on the device.
   • The gate-source voltage (VGS) should not exceed the maximum rating to avoid damaging the gate oxide.

5. Testing:

   • When testing the device, start with low currents and gradually increase to the desired operating conditions.
   • Use appropriate test equipment and methods to accurately measure parameters such as RDS(on) and VGS(th).

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against ESD and physical damage.

(For reference only)