Details

---

BUY SN74HCT573DWR https://www.utsource.net/itm/p/11259995.html
IC OCT D TRANSP LATCH 20-SOIC

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	-	1.5	V
Input High Voltage	VIH	3.5	-	-	V
Output Low Voltage (VCC=5V)	VOL	-	0.2	0.5	V
Output High Voltage (VCC=5V)	VOH	4.5	-	-	V
Output Low Voltage (VCC=2V)	VOL	-	0.1	0.4	V
Output High Voltage (VCC=2V)	VOH	1.8	-	-	V
Input Current (High)	IIH	-	20	60	μA
Input Current (Low)	IIL	-1	-	-	μA
Output Current (Source)	IOH	-	4.0	20	mA
Output Current (Sink)	IOL	-20	-4.0	-	mA
Propagation Delay Time	tpd	-	12	22	ns	@ VCC=5V, TA=25°C
Power Dissipation	PD	-	-	500	mW	Per Package
Operating Temperature Range	TA	-40	-	85	°C
Storage Temperature Range	TSTG	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • Input signals should be within the valid input voltage levels (V_IL and V_IH).
   • Avoid exceeding the maximum input current (I_IH and I_IL).

3. Output Signals:

   • Ensure that the output current does not exceed the maximum ratings (I_OH and I_OL).
   • Check the output voltage levels (V_OL and V_OH) for the specific supply voltage being used.

4. Propagation Delay:

   • Consider the propagation delay time (t_pd) when designing timing-sensitive circuits.

5. Temperature:

   • Operate the device within the specified operating temperature range (T_A).
   • Store the device within the storage temperature range (T_STG).

6. Power Dissipation:

   • Ensure that the power dissipation (P_D) does not exceed the maximum rating to avoid overheating.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering and handling procedures to prevent damage during assembly.

(For reference only)