Details

---

BUY 74LVC14AMTR https://www.utsource.net/itm/p/11260329.html
IC INVERTER 6CH 6-INP 14SO

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.65	-	5.5	V
Input Low Voltage	VIL	-	0	-	0.8	V
Input High Voltage	VIH	-	2.0	-	VCC	V
Output Low Voltage	VOL	IOL = 4 mA	0	-	0.1	V
Output High Voltage	VOH	IOH = -4 mA	VCC - 0.1	-	VCC	V
Propagation Delay Time	tpd	VCC = 3.3 V, TA = 25°C	-	6.5	-	ns
Power Consumption	Ptot	VCC = 3.3 V, f = 1 MHz, TA = 25°C	-	-	2.5	mW

Instructions for 74LVC14AMTR

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 1.65V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals (V_IL and V_IH) that meet the specified voltage levels.
   • For logic low, ensure the input voltage is between 0V and 0.8V.
   • For logic high, ensure the input voltage is between 2.0V and V_CC.

3. Output Signals:

   • The output low voltage (V_OL) should not exceed 0.1V when sourcing 4mA.
   • The output high voltage (V_OH) should be at least V_CC - 0.1V when sinking 4mA.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 6.5ns at V_CC = 3.3V and T_A = 25°C.
   • This parameter can vary with different supply voltages and temperatures.

5. Power Consumption:

   • The total power consumption (P_tot) is typically 2.5mW at V_CC = 3.3V, f = 1MHz, and T_A = 25°C.
   • Ensure adequate heat dissipation if operating at higher frequencies or temperatures.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Use appropriate ESD protection measures during handling and installation.

7. Mounting:

   • Follow the recommended PCB layout and mounting guidelines provided by the manufacturer.
   • Ensure proper soldering techniques to avoid thermal stress on the device.

8. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Keep the device in its original packaging until ready for use.

(For reference only)