Details

---

BUY NC7ST08M5X https://www.utsource.net/itm/p/11265423.html
IC GATE AND 1CH 2-INP SOT23-5

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	1.2	-	3.6	V	-
Input Low Voltage	VIL	-	-	0.8	V	VCC = 1.65V to 3.6V
Input High Voltage	VIH	0.8	-	-	V	VCC = 1.65V to 3.6V
Output Low Voltage	VOL	0	0.1	0.4	V	IOL = 4mA
Output High Voltage	VOH	2.4	-	VCC-0.4	V	IOH = -0.8mA
Propagation Delay Time	tpd	-	4.5	-	ns	VCC = 3.3V, TA = 25°C
Input Leakage Current	IIL	-	±1	-	μA	VCC = 3.6V
Output Leakage Current	IOL	-	±1	-	μA	VCC = 3.6V

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 1.2V to 3.6V.
   • Connect V_CC to the power supply and GND to ground.

2. Input Signals:

   • For a logic low input, ensure the input voltage (V_IL) is below 0.8V.
   • For a logic high input, ensure the input voltage (V_IH) is above 0.8V.

3. Output Signals:

   • When the output is low, the output voltage (V_OL) should be between 0V and 0.4V.
   • When the output is high, the output voltage (V_OH) should be between 2.4V and V_CC-0.4V.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 4.5ns at V_CC = 3.3V and ambient temperature (TA) = 25°C.

5. Leakage Currents:

   • Monitor the input leakage current (I_IL) and output leakage current (I_OL) to ensure they do not exceed ±1μA at V_CC = 3.6V.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Mounting and Soldering:

   • Follow recommended soldering profiles to avoid thermal stress.
   • Ensure proper alignment and orientation during mounting.

8. Testing:

   • Perform initial testing under controlled conditions to verify functionality.
   • Use appropriate test equipment and methods to ensure accurate measurements.

(For reference only)