Details

---

BUY MTFC16GJGEF-AIT Z https://www.utsource.net/itm/p/11269458.html
IC FLASH 128G MMC 169TFBGA

Parameter	Description	Value
Part Number	Full part number	MTFC16GJGEF-AIT Z
Memory Type	Type of memory	NAND Flash
Density	Memory density	16 Gb (2 GB)
Package	Package type	BGA
Ball Pitch	Distance between the centers of adjacent balls	0.8 mm
Ball Array	Ball array configuration	16 x 24
Operating Voltage	Supply voltage range	2.7 V to 3.6 V
Interface	Data interface	Toggle Mode
Data Rate	Maximum data transfer rate	400 MB/s
Temperature Range	Operating temperature range	-40°C to +85°C
Endurance	Number of program/erase cycles	3,000 cycles
Retention	Data retention at 25°C	10 years
ECC Requirement	Error correction code requirement	40 bits per 512 bytes
Programming Time	Typical time for programming a page	300 μs
Erase Time	Typical time for erasing a block	1.5 ms
Read Time	Typical time for reading a page	50 μs
Package Size	Dimensions of the package	11.5 mm x 13.5 mm x 1.2 mm
RoHS Compliance	Compliance with RoHS standards	Yes

Instructions:

1. Power Supply:

   • Ensure that the operating voltage is within the specified range (2.7 V to 3.6 V).
   • Use a stable power supply to avoid voltage fluctuations.

2. Signal Integrity:

   • Use controlled impedance traces for signal lines to maintain signal integrity.
   • Place decoupling capacitors close to the power pins to reduce noise.

3. Programming:

   • Use the appropriate ECC (Error Correction Code) algorithm to ensure data integrity.
   • Follow the programming sequence as specified in the datasheet to avoid data corruption.

4. Erase and Write Operations:

   • Erase blocks before writing new data to ensure proper data storage.
   • Avoid excessive erase cycles to prevent wear-out of the memory cells.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to +85°C).
   • Use thermal management techniques if operating in high-temperature environments.

6. Handling:

   • Handle the device with care to avoid physical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

7. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Use anti-static packaging when storing or transporting the device.

(For reference only)