Details

---

BUY MTP75N05HD https://www.utsource.net/itm/p/11270949.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	50	-	V
Gate-Source Voltage	VGS	-15	-	15	V
Continuous Drain Current	ID	-	75	-	A	TC = 25掳C
Pulse Drain Current	ID pul	-	200	-	A	tp = 10 渭s, IG = 10 A
Power Dissipation	PTOT	-	340	-	W	TC = 25掳C
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.8	-	K/W
Total Gate Charge	QG	-	90	-	nC
Input Capacitance	Ciss	-	1450	-	pF	VDS = 25 V, f = 1 MHz
Output Capacitance	Coss	-	360	-	pF	VDS = 25 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	150	-	pF	VDS = 25 V, f = 1 MHz

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to manage the thermal resistance and keep the junction temperature within safe limits.
   • Use a flat, clean surface for mounting to ensure good thermal contact.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short leads to minimize parasitic inductance and improve switching performance.

3. Gate Drive:

   • Apply a gate voltage (V_GS) between 10 V and 15 V for optimal performance.
   • Avoid applying voltages outside the specified range to prevent damage.

4. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 150掳C.
   • Use appropriate cooling methods such as heatsinks or forced air cooling.

5. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-55掳C to 150掳C).
   • Handle with care to avoid mechanical stress or damage to the terminals.

6. Pulse Operation:

   • For pulse operation, ensure that the pulse duration (t_p) and current (I_{D pul}) do not exceed the specified limits to avoid overheating or damage.

7. Surge Protection:

   • Consider using surge protection devices to protect against transient overvoltages and overcurrents.

8. Compliance:

   • Ensure that the application complies with all relevant safety and regulatory standards.

(For reference only)