Details

---

BUY RN2307 https://www.utsource.net/itm/p/11272684.html
RN2307 PNP Bipolar Digital Transistor (BRT) -50V -100mA/-0.1A 80 0.1W/100mW SOT-323/SC-70 marking YH switch inverter interface driver circuit

Parameter	Description	Value
Part Number	Device Identifier	RN2307
Type	Resistor Network	-
Configuration	Number of Resistors	8
Resistance	Nominal Resistance Value	10k惟 (卤1%)
Tolerance	Resistance Tolerance	卤1%
Power Rating	Maximum Power Dissipation per Resistor	1/16 W (0.0625 W)
Operating Temperature Range	Temperature Range for Normal Operation	-55掳C to +125掳C
Storage Temperature Range	Temperature Range for Storage	-65掳C to +150掳C
Operating Voltage	Maximum Operating Voltage	50V DC
Package Type	Physical Package	DIP-16
Pitch	Distance Between Pin Centers	2.54 mm
Lead Finish	Surface Finish of Leads	Tin Lead (SnPb)
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes

Instructions for Use

1. Handling Precautions:

   • Handle the RN2307 resistor network with care to avoid mechanical stress or damage.
   • Avoid exposing the device to excessive humidity or corrosive environments.

2. Mounting:

   • Ensure that the leads are bent carefully to avoid damaging the resistor network.
   • Solder the device using a temperature-controlled soldering iron to prevent thermal shock.
   • Allow sufficient cooling time after soldering to ensure proper adhesion and reliability.

3. Electrical Connections:

   • Connect the resistor network according to the circuit diagram provided in your design.
   • Ensure that the voltage applied does not exceed the maximum operating voltage of 50V DC.
   • Verify the resistance values and tolerance before installation to ensure they meet the requirements of your application.

4. Storage:

   • Store the RN2307 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect it from static discharge and physical damage.

5. Testing:

   • Use a multimeter to verify the resistance values and ensure they fall within the specified tolerance range.
   • Perform a visual inspection to check for any visible defects or damage before use.

6. Disposal:

   • Dispose of the RN2307 in accordance with local environmental regulations and guidelines for electronic waste.

(For reference only)