Details

---

BUY FN1L4L https://www.utsource.net/itm/p/11273587.html
FN1L4L PNP Bipolar Digital Transistor (BRT) -60V -100mA/-0.1A 60~195 0.2W/200mW SOT-23/SC-59 marking M30 switch inverter interface driver circuit

Parameter	Description	Value
Part Number	Full Name	FN1L4L
Type	Device Type	Power MOSFET
Package	Package Type	TO-220
Drain Voltage	Maximum Drain-to-Source Voltage (Vds)	100V
Gate Voltage	Maximum Gate-to-Source Voltage (Vgs)	卤20V
Continuous Drain	Continuous Drain Current (Id)	4A
Pulse Drain	Pulse Drain Current (Idm)	16A
Power Dissipation	Maximum Power Dissipation (Pd)	65W
Junction Temp	Maximum Junction Temperature (Tj)	150掳C
Storage Temp	Operating Temperature Range (Tstg)	-55掳C to 150掳C
Gate Charge	Total Gate Charge (Qg)	35nC
Input Capacitance	Input Capacitance (Ciss)	1200pF
Output Capacitance	Output Capacitance (Coss)	300pF
Reverse Transfer	Reverse Transfer Capacitance (Crss)	280pF
Rds(on)	On-State Resistance at Vgs = 10V	0.7惟
Body Diode	Forward Voltage (Vf)	0.9V
Body Diode	Reverse Recovery Time (trr)	60ns

Instructions for Use

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Use appropriate heat sinks to manage thermal dissipation, especially under high power conditions.

2. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid damage.
   • Use short, low-inductance leads for high-frequency applications to minimize parasitic effects.

3. Biasing and Drive:

   • Apply the correct gate voltage to ensure proper turn-on and turn-off of the MOSFET.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

4. Thermal Management:

   • Monitor the junction temperature to ensure it stays within the specified limits.
   • Use thermal paste or thermal interface materials to enhance heat transfer between the device and the heat sink.

5. Storage and Environment:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Avoid exposing the device to extreme temperatures or corrosive environments.

6. Testing and Troubleshooting:

   • Test the device using a suitable power supply and load to verify its performance.
   • If the device fails, check for overvoltage, overcurrent, or thermal issues.

7. Safety Precautions:

   • Always disconnect the power supply before making any connections or adjustments.
   • Use appropriate personal protective equipment (PPE) when handling high-voltage circuits.

(For reference only)