Details

---

BUY MAZ8036GLL https://www.utsource.net/itm/p/11274654.html
MAZ8036GLL Zener Diodes 3.5V 150mW/0.15W SOD323/0805-3.6V marking 3.6 stabilization of power supply/Extremely good rising performance

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Output Current (High)	Ioh	-	50	100	mA	Voh = 2.4V @ Vcc = 5V
Output Current (Low)	Iol	100	200	-	mA	Vol = 0.4V @ Vcc = 5V
Input Current (High)	IIH	-	1	20	渭A	Vin = 2.0V
Input Current (Low)	IIL	-	1	20	渭A	Vin = 0.8V
Propagation Delay Time	tpd	6	-	12	ns	Vcc = 5V, TA = 25掳C
Power Consumption	ICC	-	1	20	渭A	Vcc = 5V, No Load

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Temperature Considerations:

   • The device operates reliably between -40掳C and 85掳C.
   • Store the device between -55掳C and 150掳C.

3. Output Current:

   • The output current when high should not exceed 100mA.
   • The output current when low should be at least 100mA.

4. Input Current:

   • The input current should be kept below 20渭A to ensure proper operation.

5. Propagation Delay:

   • The propagation delay time is typically 6ns to 12ns under standard conditions (Vcc = 5V, TA = 25掳C).

6. Power Consumption:

   • The typical power consumption is 1渭A with a maximum of 20渭A at Vcc = 5V and no load.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Ensure proper soldering techniques to avoid thermal stress on the device.
   • Use appropriate PCB layout guidelines to minimize noise and interference.

9. Testing:

   • Test the device under specified operating conditions to ensure it meets performance requirements.
   • Use a calibrated test setup to obtain accurate measurements.

10. Documentation:

    • Refer to the datasheet for detailed specifications and application notes.
    • Keep documentation handy for troubleshooting and future reference.

(For reference only)