Details

---

BUY 1SS302 https://www.utsource.net/itm/p/11279300.html
1SS302 1 PAir series connection Switching Diodes 80V 100mA/0.1A SOT-323/SC-70 marking c3 ultra highspeed switch/low forward voltage

Below is the parameter table and instructions for the 1SS302 diode:

1SS302 Diode Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Forward Voltage	( V_F )	-	0.7	1.0	V
Reverse Breakdown Voltage	( V_ )	-	-	50	V
Reverse Current	( I_R )	-	-	100	nA
Maximum Forward Current	( I_F )	-	-	100	mA
Maximum Reverse Current	( I_ )	-	-	100	nA
Capacitance	( C )	-	4	6	pF
Operating Temperature Range	( T_A )	-40	-	125	掳C

Instructions for Using 1SS302 Diode

1. Mounting:

   • Ensure the diode is mounted on a suitable PCB or breadboard.
   • Use appropriate soldering techniques to avoid overheating the diode.

2. Polarity:

   • The 1SS302 is a standard diode with a cathode (negative) and anode (positive) terminal.
   • The cathode is usually marked with a band or dot on the diode body.

3. Forward Bias:

   • Apply the forward voltage (( V_F )) across the diode to allow current to flow from the anode to the cathode.
   • Ensure the forward current (( I_F )) does not exceed 100 mA to prevent damage.

4. Reverse Bias:

   • Apply the reverse voltage (( V_ )) across the diode to block current flow.
   • The maximum reverse voltage should not exceed 50 V to avoid breakdown.

5. Temperature Considerations:

   • Operate the diode within the temperature range of -40掳C to 125掳C.
   • Avoid exposing the diode to extreme temperatures to prevent performance degradation or failure.

6. Storage:

   • Store the diode in a dry, cool place to prevent moisture damage.
   • Handle the diode with care to avoid mechanical stress.

7. Testing:

   • Use a multimeter to test the diode for continuity and reverse bias characteristics.
   • Ensure the diode is not shorted or open before use.

By following these instructions, you can ensure reliable operation and longevity of the 1SS302 diode in your circuits.

(For reference only)