Details
BUY RS2J https://www.utsource.net/itm/p/11279613.html
RS2J rectifiers 1.5A 1.3V SMB/DO-214AA marking
| Parameter | Description |
|---|---|
| Part Number | RS2J |
| Type | Relay |
| Coil Voltage | 5V, 12V, 24V DC |
| Contact Form | SPDT (Single Pole Double Throw) |
| Contact Rating | 10A at 250V AC / 10A at 30V DC |
| Coil Resistance | 70惟 (5V), 200惟 (12V), 400惟 (24V) |
| Operating Temp. | -40掳C to +85掳C |
| Insulation Resistance | >100M惟 at 500V DC |
| Dielectric Strength | 1500V AC for 1 minute |
| Life Expectancy | 100,000 operations (mechanical), 10,000 operations (electrical) |
| Weight | 15g |
| Dimensions | 17.5mm x 12.5mm x 12.5mm |
Instructions
Installation:
- Ensure the relay is mounted on a flat, stable surface.
- Use the provided mounting holes for secure attachment.
Wiring:
- Connect the coil terminals to the appropriate power supply based on the coil voltage.
- Connect the common (COM) terminal to the circuit you want to control.
- Connect the normally open (NO) or normally closed (NC) terminals to the load or control circuit as required.
Operation:
- When the coil is energized, the common terminal will switch from the NC to the NO position.
- When the coil is de-energized, the common terminal will return to the NC position.
Testing:
- Use a multimeter to verify the continuity between the COM and NC/NO terminals before and after energizing the coil.
- Ensure the relay operates smoothly without any mechanical noise.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the contacts with a dry cloth if necessary.
Storage:
- Store the relay in a dry, cool place away from direct sunlight and corrosive substances.
View more about RS2J on main site