Details

---

BUY SK32 https://www.utsource.net/itm/p/11285628.html
SK32 SBD Schottky Barrier Diodes 20V 3A 500mV/0.5V SMC/DO-214AB marking SK32 fast ,high voltage switch

Parameter	Description	Value
Part Number	Device Identifier	SK32
Type	Component Type	MOSFET
Package	Housing Style	TO-220
VDS	Drain-to-Source Voltage	30V
VGS	Gate-to-Source Voltage	卤20V
ID	Continuous Drain Current	16A
PD	Power Dissipation	40W
RDS(on)	On-State Resistance (VGS=10V)	5m惟
fT	Transition Frequency	3MHz
QG	Gate Charge	15nC
VGS(th)	Gate Threshold Voltage	2V to 4V
TJ	Junction Temperature Range	-55掳C to 150掳C
TSTG	Storage Temperature Range	-65掳C to 150掳C

Instructions for Use

1. Handling Precautions:

   • Handle the SK32 with care to avoid damage to the pins and package.
   • Use proper ESD (Electrostatic Discharge) protection when handling to prevent damage to the gate.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Use a thermal compound between the heatsink and the SK32 to improve heat dissipation.
   • Tighten the mounting screws to the recommended torque specified by the heatsink manufacturer.

3. Biasing:

   • Apply the gate voltage carefully to avoid exceeding the maximum V_GS rating.
   • Use a gate resistor to limit the current and protect the gate from transient voltages.

4. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • Monitor the temperature during operation and adjust the heatsink or cooling method if necessary.

5. Circuit Design:

   • Design the circuit to handle the maximum current and power dissipation ratings.
   • Use appropriate snubber circuits to suppress voltage spikes if operating at high frequencies.

6. Storage:

   • Store the SK32 in a dry, cool place away from direct sunlight and corrosive environments.
   • Keep the components in their original packaging until ready for use to protect against static and physical damage.

(For reference only)