Details

---

BUY CPH6302 https://www.utsource.net/itm/p/11289349.html
CPH6302 P MOSFET -30V -3A SOT-163/SOT23-6/CPH6 marking JB ultra high-speed switch 4V drive

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.7	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	200	-	mA	Maximum continuous output current
Quiescent Current	IQ	-	1.5	-	渭A	Typical quiescent current at VDD = 3V, TA = 25掳C
Dropout Voltage	VDROPOUT	-	200	-	mV	Typical dropout voltage at IOUT = 100mA, VDD = 3V, TA = 25掳C
Load Regulation	-	-	0.1	-	%	Load regulation from 0 to 200mA, VDD = 3V, TA = 25掳C
Line Regulation	-	-	0.05	-	%/V	Line regulation over the operating voltage range, IOUT = 100mA, TA = 25掳C
Thermal Shutdown	TSD	-	150	-	掳C	Thermal shutdown temperature
Operating Junction Temperature	TJ	-40	-	125	掳C	Operating junction temperature range
Storage Temperature	TSTG	-40	-	125	掳C	Storage temperature range

Instructions for Using CPH6302

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 1.7V to 5.5V.
   • Avoid exceeding the maximum supply voltage to prevent damage to the device.

2. Output Current (IOUT):

   • The device can provide up to 200mA of continuous output current.
   • For higher current requirements, consider using external components or a different regulator.

3. Quiescent Current (IQ):

   • The typical quiescent current is 1.5渭A at 3V supply voltage and 25掳C ambient temperature.
   • This low quiescent current makes the device suitable for battery-powered applications.

4. Dropout Voltage (VDROPOUT):

   • The typical dropout voltage is 200mV at 100mA output current and 3V supply voltage.
   • Ensure the input voltage is at least 200mV higher than the desired output voltage to maintain regulation.

5. Load Regulation:

   • The load regulation is typically 0.1% from 0 to 200mA output current.
   • This ensures stable output voltage under varying load conditions.

6. Line Regulation:

   • The line regulation is typically 0.05%/V over the operating voltage range.
   • This ensures stable output voltage with changes in input voltage.

7. Thermal Shutdown (TSD):

   • The device will shut down if the junction temperature exceeds 150掳C to prevent thermal damage.
   • Ensure proper heat dissipation and avoid operating the device in high-temperature environments.

8. Operating Junction Temperature (TJ):

   • The device can operate over a junction temperature range of -40掳C to 125掳C.
   • Ensure the ambient temperature and heat dissipation are managed to keep the junction temperature within this range.

9. Storage Temperature (TSTG):

   • The device can be stored over a temperature range of -40掳C to 125掳C.
   • Avoid exposing the device to temperatures outside this range during storage.

10. Mounting and Handling:

    • Follow standard handling and mounting procedures to avoid damage to the device.
    • Use appropriate soldering techniques and ensure the device is not subjected to excessive mechanical stress.

(For reference only)