Details

---

BUY HSMS-2824 https://www.utsource.net/itm/p/11292553.html
HSMS-2824 common anodeSBD Schottky Barrier Diodes 15V 10mA 340mV/0.34V SOT-23/SC-59 marking C4

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Reverse Voltage	VR	-	0	150	V
Forward Current	IF	-	0	30	mA
Peak Forward Current	IFSM	-	-	100	mA (10 渭s)
Reverse Current	IR	-	0	1	渭A @ 150 V
Forward Voltage	VF	1.0	1.2	1.6	V @ 20 mA
Capacitance	C	-	4	6	pF @ 1 MHz
Operating Temperature	Toper	-40	-	125	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a flat, clean surface.
   • Use appropriate soldering techniques to avoid excessive heat, which can damage the device.

2. Handling:

   • Handle the device with care to prevent mechanical damage.
   • Avoid touching the leads directly to minimize the risk of static discharge.

3. Electrical Connections:

   • Connect the anode and cathode correctly to avoid reverse bias damage.
   • Ensure that the forward current does not exceed 30 mA continuously.
   • For peak forward current, do not exceed 100 mA for more than 10 渭s.

4. Environmental Conditions:

   • Operate the device within the specified temperature range (-40掳C to 125掳C).
   • Store the device in a dry environment within the storage temperature range (-65掳C to 150掳C).

5. Testing:

   • Use a multimeter or an appropriate testing device to verify the forward voltage and reverse current.
   • Ensure the capacitance is within the specified range at 1 MHz.

6. Storage:

   • Store the device in a moisture-proof container to prevent degradation.
   • Follow ESD (Electrostatic Discharge) precautions during handling and storage.

7. Soldering:

   • Preheat the board to reduce thermal shock.
   • Use a soldering iron with a temperature setting suitable for the device (typically 300掳C to 350掳C).
   • Solder each lead for no more than 3 seconds to avoid overheating.

8. Inspection:

   • Visually inspect the device after soldering to ensure proper alignment and connection.
   • Check for any signs of physical damage or overheating.

By following these guidelines, you can ensure the reliable operation and longevity of the HSMS-2824 diode.

(For reference only)