Details

---

BUY SN65220DBVR https://www.utsource.net/itm/p/11298919.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	4.75	5.0	5.25	V
Output Current (High)	IOL	-	16	-	mA	VCC = 5V, VOH = 2.4V
Output Current (Low)	IOH	-	-16	-	mA	VCC = 5V, VOL = 0.4V
Input High Voltage	VIH	2.0	-	5.5	V
Input Low Voltage	VIL	0	-	0.8	V
Propagation Delay Time	tpd	-	10	-	ns	VCC = 5V, TA = 25掳C
Power Dissipation	PD	-	-	350	mW	Continuous
Operating Temperature	TOPR	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Input Signals:

   • Input high (VIH) should be between 2.0V and 5.5V.
   • Input low (VIL) should be between 0V and 0.8V.
   • Ensure input signals are clean and within these ranges to prevent misinterpretation by the device.

3. Output Signals:

   • The output current when high (IOL) can sink up to 16mA.
   • The output current when low (IOH) can source up to -16mA.
   • Use appropriate load resistors to ensure the output currents do not exceed these limits.

4. Propagation Delay:

   • The typical propagation delay time (tpd) is 10ns at VCC = 5V and ambient temperature (TA) = 25掳C.
   • Consider this delay when designing timing-critical applications.

5. Power Dissipation:

   • The maximum power dissipation (PD) is 350mW.
   • Ensure adequate heat sinking or cooling if operating near this limit to prevent overheating.

6. Temperature Range:

   • The operating temperature range (TOPR) is from -40掳C to 85掳C.
   • The storage temperature range (TSTG) is from -65掳C to 150掳C.
   • Store and operate the device within these temperature ranges to ensure reliability.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Ensure proper mounting on the PCB to avoid mechanical stress.
   • Follow the recommended footprint and soldering profile provided by the manufacturer.

By adhering to these parameters and instructions, you can ensure optimal performance and longevity of the SN65220DBVR device.

(For reference only)