Details

---

BUY 2SK2653 https://www.utsource.net/itm/p/11301232.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	V(DS)	-	100	-	V
Gate-Source Voltage	V(GS)	-10	0	10	V
Drain Current	I(D)	-	10	-	A	V(DS) = 100V, Tc = 25掳C
Gate Threshold Voltage	V(GS(th))	2	4	6	V	I(D) = 1mA, Tc = 25掳C
Transconductance	gfs	3	5	7	S	V(DS) = 10V, I(D) = 1A
Input Capacitance	Ciss	-	800	-	pF	f = 1MHz
Output Capacitance	Coss	-	200	-	pF	f = 1MHz
Reverse Transfer	Crss	-	100	-	pF	f = 1MHz
Total Power Dissipation	Ptot	-	100	-	W	Ta = 25掳C
Junction Temperature	Tj	-55	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • The 2SK2653 is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures when handling the device.
   • Avoid exceeding the maximum ratings specified in the table to prevent damage to the device.

2. Mounting:

   • Ensure that the device is securely mounted to a heatsink if operating at high power levels to maintain the junction temperature within safe limits.
   • Use thermal paste or a thermal pad between the device and the heatsink to improve heat dissipation.

3. Biasing:

   • Apply the gate-source voltage (V(GS)) carefully to avoid exceeding the threshold voltage range. The typical V(GS) for operation should be within the specified range to ensure reliable operation.
   • Ensure that the drain-source voltage (V(DS)) does not exceed the maximum rating of 100V to prevent breakdown.

4. Operation:

   • Monitor the drain current (I(D)) to ensure it does not exceed the maximum rating of 10A. Excessive current can lead to overheating and potential failure.
   • Keep the junction temperature (Tj) within the specified range by ensuring adequate cooling and avoiding prolonged operation at high power levels.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Follow the storage temperature range (-55掳C to 150掳C) to ensure the device remains in good condition.

6. Testing:

   • When testing the device, use appropriate test equipment and follow the recommended test conditions to obtain accurate results.
   • Measure the input capacitance (Ciss), output capacitance (Coss), and reverse transfer capacitance (Crss) using a capacitance meter at the specified frequency (1MHz).

By following these guidelines, you can ensure the reliable and efficient operation of the 2SK2653.

(For reference only)