Details

---

BUY A1930 , C5171 https://www.utsource.net/itm/p/11303395.html

Parameter	A1930	C5171
Type	Hall Effect Sensor	Hall Effect Sensor
Output Type	Digital	Digital
Operating Voltage (V)	4.5 to 24	4.5 to 24
Quiescent Supply Current (mA)	8.5 max	8.5 max
Magnetic Sensitivity (mT)	30 卤 10	60 卤 15
Response Time (渭s)	100 max	100 max
Operating Temperature (掳C)	-40 to 150	-40 to 150
Package	TO-92	TO-92
Polarity	Bipolar	Unipolar

Instructions for Use:

A1930:

1. Power Supply: Connect the Vcc pin to a power supply within the operating voltage range (4.5 to 24V).
2. Ground Connection: Ensure the GND pin is connected to the ground.
3. Output Configuration: The output pin will provide a digital signal (high or low) based on the magnetic field detected.
4. Magnetic Field Sensitivity: The sensor is designed to trigger with a magnetic field strength of approximately 30 mT, with a tolerance of 卤10 mT.
5. Temperature Considerations: Operate the sensor within the temperature range of -40掳C to 150掳C to ensure reliable performance.

C5171:

1. Power Supply: Connect the Vcc pin to a power supply within the operating voltage range (4.5 to 24V).
2. Ground Connection: Ensure the GND pin is connected to the ground.
3. Output Configuration: The output pin will provide a digital signal (high or low) based on the magnetic field detected.
4. Magnetic Field Sensitivity: The sensor is designed to trigger with a magnetic field strength of approximately 60 mT, with a tolerance of 卤15 mT.
5. Temperature Considerations: Operate the sensor within the temperature range of -40掳C to 150掳C to ensure reliable performance.
6. Polarity Sensitivity: The C5171 is a unipolar sensor, meaning it will only respond to one polarity of the magnetic field. Ensure the correct orientation of the magnetic field for optimal operation.

(For reference only)