Details

---

BUY K2700 https://www.utsource.net/itm/p/11303429.html

Parameter	Description
Part Number	K2700
Type	Digital Multimeter
Display	4.5-digit LCD
Range	Auto and manual
Voltage	DC: 0 to 1000V, AC: 0 to 750V
Current	DC: 0 to 10A, AC: 0 to 10A
Resistance	0 to 50M惟
Capacitance	0 to 100mF
Frequency	0 to 1MHz (AC voltage)
Continuity	Beep at < 50惟
Diode Test	3.0V max, 1mA test current
Temperature	-40掳C to 1200掳C (with K-type thermocouple)
Accuracy	卤(0.05% + 5 digits) for DC voltage
Input Impedance	10M惟 (DC voltage), 2M惟 (AC voltage)
Power Supply	9V battery
Battery Life	Approximately 500 hours (continuous use)
Dimensions	185mm x 85mm x 35mm
Weight	250g (without probes)
Operating Temperature	0掳C to 50掳C
Storage Temperature	-20掳C to 60掳C
Humidity	10% to 80% RH (non-condensing)
Compliance	CE, RoHS

Instructions

1. Power On/Off:

   • Press the ON/OFF button to turn the multimeter on or off.

2. Function Selection:

   • Use the rotary switch to select the desired measurement function (e.g., DC voltage, AC voltage, resistance, etc.).

3. Range Selection:

   • For auto range, set the rotary switch to the "AUTO" position.
   • For manual range, select the appropriate range using the rotary switch.

4. Connecting Probes:

   • Insert the red probe into the "V惟mA" jack for voltage, resistance, continuity, diode test, and temperature measurements.
   • Insert the black probe into the "COM" jack.
   • For current measurements, insert the red probe into the "10A" jack for currents up to 10A.

5. Performing Measurements:

   • Place the probes across the component or circuit you want to measure.
   • Read the measurement on the LCD display.

6. Continuity Test:

   • Set the rotary switch to the continuity test position.
   • Touch the probes to the points you want to test. The multimeter will beep if the resistance is less than 50惟.

7. Diode Test:

   • Set the rotary switch to the diode test position.
   • Connect the red probe to the anode and the black probe to the cathode of the diode. The multimeter will display the forward voltage drop.

8. Temperature Measurement:

   • Connect a K-type thermocouple to the "K" jack.
   • Set the rotary switch to the temperature measurement position.
   • Place the thermocouple in the area to be measured.

9. Battery Replacement:

   • Turn off the multimeter.
   • Remove the battery cover located on the back of the multimeter.
   • Replace the 9V battery.
   • Reattach the battery cover.

10. Maintenance:

    • Keep the multimeter clean and dry.
    • Store in a cool, dry place when not in use.
    • Do not expose to extreme temperatures or humidity.
    • Periodically check the probes and leads for damage and replace if necessary.

For more detailed information, refer to the user manual provided with the K2700 multimeter.

(For reference only)