Details

---

BUY J3305-1 https://www.utsource.net/itm/p/11304179.html

Parameter	Value	Unit
Part Number	J3305-1	-
Type	Diode	-
Maximum Reverse Voltage (Vr)	600	V
Maximum Forward Current (If)	5	A
Peak Forward Surge Current (Ifsm)	200	A
Maximum Power Dissipation (Pd)	100	W
Operating Temperature Range	-40 to 175	掳C
Forward Voltage (Vf) at 5A	1.1	V
Reverse Leakage Current (Ir) at 600V	5	渭A
Storage Temperature Range	-55 to 150	掳C
Package Type	TO-220	-

Instructions for Use:

1. Mounting:

   • Ensure the diode is mounted on a heatsink if operating near maximum current to prevent overheating.
   • Use a thermal compound between the diode and heatsink to improve heat transfer.

2. Wiring:

   • Connect the anode to the positive side of the circuit and the cathode to the negative side.
   • Avoid reverse biasing the diode beyond its maximum reverse voltage to prevent damage.

3. Surge Handling:

   • The diode can handle peak forward surge currents up to 200A for short durations. Ensure that any surge conditions do not exceed this limit.

4. Temperature Management:

   • Operate the diode within the specified temperature range to ensure reliable performance.
   • Monitor the operating temperature and use appropriate cooling methods if necessary.

5. Storage:

   • Store the diode in a dry environment within the storage temperature range to prevent damage.

6. Handling:

   • Handle the diode with care to avoid mechanical stress or damage to the leads.
   • Use anti-static precautions to prevent electrostatic discharge damage.

7. Testing:

   • Before installation, test the diode using a multimeter to ensure it is functioning correctly.
   • Check for continuity between the anode and cathode; there should be low resistance in one direction and high resistance in the other.

8. Compliance:

   • Ensure the diode meets all relevant safety and regulatory standards for your application.

(For reference only)