Details

---

BUY STGP19NC60KD https://www.utsource.net/itm/p/11526437.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	600	-	V	IC = 25 A, Tj = 25掳C
Collector-Base Voltage	VCBO	-	600	-	V	IC = 0 A, Tj = 25掳C
Emitter-Base Voltage	VEBO	-	7.0	-	V	IE = 50 mA, Tj = 25掳C
Continuous Collector Current	IC	-	19	-	A	TC = 25掳C
Collector-Emitter Saturation Voltage	VCE(sat)	-	1.8	-	V	IC = 15 A, IB = 1.5 A, Tj = 25掳C
Base-Emitter Saturation Voltage	VBE(sat)	-	2.3	-	V	IC = 15 A, IB = 1.5 A, Tj = 25掳C
Storage Temperature Range	Tstg	-55	-	150	掳C	-
Operating Junction Temperature	Tj	-55	-	150	掳C	-
Thermal Resistance, Junction to Case	Rth(j-c)	-	0.8	-	掳C/W	-
Maximum Power Dissipation	PD	-	180	-	W	TC = 25掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the device is mounted on a suitable heatsink to maintain the operating junction temperature within the specified range.
   • Follow the recommended soldering profile to avoid thermal shock and damage.

3. Biasing:

   • Ensure that the base current (I_B) is sufficient to keep the transistor in saturation for the desired collector current (I_C).
   • Use appropriate base resistors to limit the base current and protect the device from overcurrent conditions.

4. Thermal Management:

   • Monitor the junction temperature (T_j) to ensure it does not exceed the maximum rated value.
   • Use thermal paste or thermal interface materials to improve heat transfer between the device and the heatsink.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid exposing the device to extreme temperatures or humidity.

6. Testing:

   • Use appropriate test equipment and procedures to verify the device parameters.
   • Refer to the datasheet for specific test conditions and methods.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Ensure that the device is properly isolated and disconnected from power sources during testing and maintenance.

(For reference only)