Details

---

BUY KGF25N120KDA-U/P https://www.utsource.net/itm/p/11530899.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Breakdown Voltage	BVdss	-	-	1200	V
Continuous Drain Current	Id	-	25	-	A	@ Tc = 25掳C
Pulse Drain Current	Ipp	-	100	-	A	@ Tc = 25掳C, t = 10 渭s, Duty Cycle = 1%
Gate-Source Voltage	Vgs	-15	-	15	V
Input Capacitance	Ciss	-	3600	-	pF	@ Vds = 600 V, f = 1 MHz
Output Capacitance	Coss	-	280	-	pF	@ Vds = 600 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	800	-	pF	@ Vds = 600 V, f = 1 MHz
Total Gate Charge	Qg	-	115	-	nC	@ Vds = 600 V, Id = 10 A
On-State Resistance	Rds(on)	-	1.7	-	惟	@ Vgs = 10 V, Id = 25 A, Tc = 25掳C
Turn-On Delay Time	td(on)	-	45	-	ns	@ Vds = 600 V, Id = 10 A, Vgs = 10 V
Rise Time	tr	-	50	-	ns	@ Vds = 600 V, Id = 10 A, Vgs = 10 V
Turn-Off Delay Time	td(off)	-	50	-	ns	@ Vds = 600 V, Id = 10 A, Vgs = 10 V
Fall Time	tf	-	45	-	ns	@ Vds = 600 V, Id = 10 A, Vgs = 10 V
Junction Temperature	Tj	-55	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Handle the device with care to avoid mechanical damage and electrostatic discharge (ESD).

2. Biasing and Operation:

   • Apply the gate-source voltage (Vgs) within the specified limits to prevent gate oxide breakdown.
   • Ensure the drain current (Id) does not exceed the continuous or pulse ratings to avoid overheating and potential failure.

3. Thermal Management:

   • Use appropriate thermal management techniques such as heatsinks and thermal paste to ensure the junction temperature remains below 150掳C.
   • Monitor the temperature during operation and ensure adequate cooling.

4. Storage:

   • Store the device in a dry, cool environment to prevent moisture absorption and degradation.
   • Keep the device in its original packaging until ready for use to protect against ESD.

5. Testing and Troubleshooting:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • If the device fails to meet specifications, check for proper biasing, thermal management, and environmental conditions.

6. Safety:

   • Always follow safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate personal protective equipment (PPE) and follow all relevant safety standards.

(For reference only)