Details

---

BUY RP1E070XNFPFTCR https://www.utsource.net/itm/p/11531294.html

Parameter	Description	Value
Part Number	Full part number	RP1E070XNFPFTCR
Manufacturer	Manufacturer	Vishay
Series	Series name	RP1E
Type	Type of component	Power MOSFET
Package	Package type	TO-263 (D2PAK)
Polarity	Polarity	N-Channel
VDSS	Drain-to-source voltage	70 V
RDS(on)	On-state resistance at VGS=10V	4.5 m惟
ID	Continuous drain current	80 A
Power Dissipation	Maximum power dissipation	150 W
Operating Temperature	Operating temperature range	-55掳C to +175掳C
Storage Temperature	Storage temperature range	-65掳C to +150掳C
Gate Charge	Total gate charge	119 nC
Input Capacitance	Input capacitance at VDS=10V, f=1MHz	2200 pF
Output Capacitance	Output capacitance at VDS=10V, f=1MHz	1000 pF
Reverse Transfer Capacitance	Reverse transfer capacitance at VDS=10V, f=1MHz	300 pF
Thermal Resistance	Junction-to-case thermal resistance	0.45掳C/W
Thermal Resistance	Junction-to-ambient thermal resistance	35掳C/W
Lead Finish	Lead finish	Matte Tin
RoHS Compliance	RoHS compliance	Yes

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid damaging the leads and the package.

2. Mounting:

   • Ensure proper heat sinking to manage thermal resistance.
   • Use recommended torque values for screw terminals to avoid over-tightening and damage.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid short circuits.
   • Use appropriate wire gauges to handle the current ratings.

4. Operational Considerations:

   • Ensure that the operating voltage does not exceed the rated V_DSS.
   • Keep the operating temperature within the specified range to avoid thermal runaway.
   • Use gate resistors to control switching speed and reduce EMI.

5. Testing:

   • Use a multimeter or an oscilloscope to verify the correct operation and connections.
   • Perform initial testing under controlled conditions to ensure safe operation.

6. Safety:

   • Always follow safety guidelines when working with high-voltage and high-current circuits.
   • Use protective equipment such as gloves and goggles when handling the component.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)