Details
BUY MBR4050PT https://www.utsource.net/itm/p/11533284.html
Parameter | Symbol | Min | Typ | Max | Unit | Notes |
---|---|---|---|---|---|---|
Average Rectified Current | IF(AV) | - | 50 | - | A | |
Peak Repetitive Forward Surge Current (10/1000 渭s) | IFSM | - | 300 | - | A | |
Maximum RMS Current (85掳C) | IRMS | - | 70 | - | A | |
Maximum DC Blocking Voltage | VR | - | 400 | - | V | |
Peak Repetitive Reverse Voltage | VRRM | - | 400 | - | V | |
Forward Voltage Drop at IF = 5A | VF | - | 1.1 | - | V | |
Reverse Leakage Current at VR = 400V, TJ = 25掳C | IR | - | 10 | - | 渭A | |
Junction Temperature | TJ | -55 | - | 150 | 掳C | |
Storage Temperature Range | TSTG | -65 | - | 150 | 掳C | |
Thermal Resistance, Junction to Case | R胃JC | - | 1.5 | - | 掳C/W |
Instructions for Use:
Handling Precautions:
- Handle the MBR4050PT with care to avoid damage to the leads or the body.
- Use appropriate ESD (Electrostatic Discharge) protection when handling the device.
Mounting:
- Ensure that the mounting surface is clean and flat.
- Apply thermal paste if necessary to improve heat dissipation.
- Solder the leads quickly to avoid overheating the junction.
Operating Conditions:
- Do not exceed the maximum ratings specified in the table.
- Ensure adequate cooling if operating near the maximum current or voltage limits.
- Avoid operating the device in environments with high humidity or corrosive gases.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect against static damage.
Testing:
- Use a multimeter to check for continuity and resistance before installation.
- Verify the forward and reverse characteristics using a diode test function on a multimeter.
Troubleshooting:
- If the device fails, check for signs of overheating, physical damage, or incorrect installation.
- Replace the device if it shows any signs of failure or if it does not meet the specified parameters.
Disposal:
- Dispose of the device in accordance with local environmental regulations.
- Do not incinerate the device as it may release harmful substances.
View more about MBR4050PT on main site