Details

---

BUY 74HC10D NXP SOP3.9MM SOP14 https://www.utsource.net/itm/p/11533587.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	0.8	-	V	@ VCC = 4.5V to 5.5V
Input High Voltage	VIH	-	2.0	-	V	@ VCC = 4.5V to 5.5V
Output Low Voltage	VOL	-	0.1	0.4	V	@ IOL = 4mA, VCC = 4.5V to 5.5V
Output High Voltage	VOH	2.4	-	-	V	@ IOH = -0.4mA, VCC = 4.5V to 5.5V
Input Current	IIN	-1	0	1	渭A	@ VIN = 0V to VCC
Output Current (Low)	IOL	-	-	-25	mA	@ VOL = 0.4V, VCC = 4.5V to 5.5V
Output Current (High)	IOH	-25	-	-	渭A	@ VOH = 2.4V, VCC = 4.5V to 5.5V
Propagation Delay Time	tpd	-	10	20	ns	@ VCC = 5V, TA = 25掳C
Power Consumption	Ptot	-	10	20	mW	@ fosc = 10MHz, VCC = 5V

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the range of 2.0V to 6.0V. The device is designed to operate optimally at 5V.
2. Input Levels:
   • For a logic low input, ensure the voltage is below 0.8V.
   • For a logic high input, ensure the voltage is above 2.0V.
3. Output Levels:
   • When the output is low, the voltage will be around 0.1V with a maximum of 0.4V when sourcing 4mA.
   • When the output is high, the voltage will be at least 2.4V when sinking -0.4mA.
4. Current Ratings:
   • The device can sink up to 25mA and source up to 25渭A.
5. Propagation Delay:
   • The typical propagation delay time is 10ns at 5V and 25掳C, with a maximum of 20ns.
6. Power Consumption:
   • The total power consumption is typically 10mW at 10MHz and 5V.
7. Handling:
   • Handle the device with care to avoid static damage. Use proper ESD protection.
8. Mounting:
   • Ensure the device is mounted correctly on the PCB with appropriate soldering techniques to avoid thermal issues.
9. Operating Temperature:
   • The device is rated for operation from -40掳C to 85掳C.

Pin Configuration (SOP14):

Pin Number	Pin Name	Description
1	A1	Input 1 of AND gate 1
2	B1	Input 2 of AND gate 1
3	C1	Input 3 of AND gate 1
4	Y1	Output of AND gate 1
5	A2	Input 1 of AND gate 2
6	B2	Input 2 of AND gate 2
7	C2	Input 3 of AND gate 2
8	Y2	Output of AND gate 2
9	A3	Input 1 of AND gate 3
10	B3	Input 2 of AND gate 3
11	C3	Input 3 of AND gate 3
12	Y3	Output of AND gate 3
13	A4	Input 1 of AND gate 4
14	B4	Input 2 of AND gate 4
15	C4	Input 3 of AND gate 4
16	Y4	Output of AND gate 4
17	GND	Ground
18	VCC	Power Supply

(For reference only)