Details

---

BUY MJE350 ON TO-126 https://www.utsource.net/itm/p/11533753.html

Parameter	Value	Unit
Collector-Emitter Voltage (VCEO)	40	V
Emitter-Base Voltage (VEBO)	5	V
Collector Current (IC)	1.5	A
Power Dissipation (PD)	625	mW
Transition Frequency (fT)	30	MHz
Storage Temperature Range (TSTG)	-65 to 150	°C
Junction Temperature (TJ)	-65 to 150	°C

Instructions for MJE350 ON TO-126

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damaging the leads and body.

2. Mounting:

   • Ensure proper heat sinking if operating near maximum power dissipation.
   • Use appropriate mounting hardware compatible with TO-126 package.

3. Soldering:

   • Preheat the component to reduce thermal shock.
   • Solder within the temperature range of 260°C for no more than 10 seconds per joint.
   • Allow adequate cooling time post-soldering.

4. Electrical Connections:

   • Verify correct polarity before applying power.
   • Do not exceed the maximum ratings listed in the parameter table.

5. Testing:

   • Perform initial testing at low power levels.
   • Gradually increase power while monitoring temperature and performance.

6. Safety:

   • Always use protective equipment when handling electronic components.
   • Follow all guidelines provided by the manufacturer for safe operation.

(For reference only)