Details

---

BUY MOC3082M https://www.utsource.net/itm/p/11545399.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	VIF	IF=10mA		1.2	1.5	V
Input Peak Reverse Voltage	VIRM				5	V
Input Current	IF	TA=25掳C	15	30	50	mA
Isolation Voltage	VIORM	1min, 50/60Hz			4000	Vrms
Zero Cross Range	VZC		-50		+50	V
Output Turn-On Time	tr	IT=1A		8	12	渭s
Output Turn-Off Time	tf	IT=1A		8	12	渭s
Repetitive Peak Off-State Voltage	VDRM	TJ=25掳C			600	V
RMS On-State Current	IT(RMS)	TC=70掳C, 1 cycle			100	mA

Instructions for MOC3082M:

1. Mounting and Handling:

   • Handle the device carefully to avoid damage.
   • Ensure proper mounting on a PCB with adequate clearance.

2. Input Circuit:

   • Connect the input side (pins 1 and 2) to your control circuit ensuring the current does not exceed the maximum specified.
   • Use appropriate resistors to limit the current through the LED.

3. Output Circuit:

   • Connect the output side (pins 4 and 6) to the load you wish to control.
   • Ensure that the load voltage does not exceed the repetitive peak off-state voltage.

4. Zero Cross Detection:

   • The MOC3082M includes zero-cross detection which helps in reducing EMI by switching at zero crossing points of the AC waveform.

5. Isolation:

   • The device provides electrical isolation between input and output circuits up to 4000Vrms for 1 minute.

6. Operating Temperature:

   • Ensure that the operating temperature is within the specified range to prevent overheating and potential failure.

7. Safety Precautions:

   • Always use appropriate safety measures when handling high voltages.
   • Ensure the device is properly insulated and installed according to local electrical codes and standards.

(For reference only)