Details

---

BUY PS2802-1-F3-A https://www.utsource.net/itm/p/11545432.html

Parameter	Description	Value
Part Number	Part number	PS2802-1-F3-A
Type	Type of component	Photocoupler
Isolation Voltage	Maximum isolation voltage (VISO)	5000 Vrms for 1 minute
Forward Current	Maximum forward current (IF)	60 mA
Collector-Emitter Voltage	Maximum collector-emitter voltage (VCEO)	70 V
Emitter-Base Voltage	Maximum emitter-base voltage (VEBO)	5.5 V
Collector Current	Maximum collector current (IC)	50 mA
Storage Temperature	Operating temperature range	-40掳C to +110掳C
Operating Temperature	Storage temperature range	-40掳C to +110掳C
Rise Time	Rise time (tr)	1.2 渭s (typical)
Fall Time	Fall time (tf)	0.6 渭s (typical)
Circuit Configuration	Circuit configuration	Single channel
Package	Package type	DIP-4
Lead Pitch	Lead pitch	2.54 mm
Lead Free	RoHS compliance	Yes

Instructions:

1. Handling Precautions:

   • Handle the PS2802-1-F3-A with care to avoid damage to the leads and body.
   • Use appropriate ESD protection when handling the device.

2. Mounting:

   • Ensure that the leads are bent carefully to avoid excessive stress on the package.
   • Soldering should be done at a temperature not exceeding 260掳C for no more than 10 seconds per lead.
   • Allow the device to cool naturally after soldering.

3. Electrical Connections:

   • Connect the LED side (input) to the control circuit, ensuring that the forward current does not exceed 60 mA.
   • Connect the phototransistor side (output) to the load circuit, ensuring that the collector current does not exceed 50 mA.

4. Operating Conditions:

   • Ensure that the operating temperature is within the specified range (-40掳C to +110掳C).
   • Avoid exposing the device to voltages or currents beyond the maximum ratings.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the required specifications.
   • Use a multimeter or other appropriate test equipment to verify the functionality of the photocoupler.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static discharge.

7. Disposal:

   • Dispose of the device according to local environmental regulations and guidelines for electronic waste.

(For reference only)