Details

---

BUY TLP112A(TPL，F) https://www.utsource.net/itm/p/11545437.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.6	V	IF = 20 mA, TA = 25°C
Reverse Breakdown Voltage	VBR	5	-	7	V	IR = 5 mA
Output Collector-Emitter Voltage	VCEO	-	-	30	V	IC = 50 mA, TA = 25°C
Output Collector Current	IC	-	-	50	mA	VCEO = 30 V, TA = 25°C
Input Current	IF	-	20	-	mA	VF = 1.4 V, TA = 25°C
Current Transfer Ratio	CTR	100	-	500	%	IF = 20 mA, IC = 50 mA, TA = 25°C
Rise Time	tr	-	0.2	-	μs	IF = 20 mA, RL = 100 Ω, VCC = 5 V, CL = 100 pF
Fall Time	tf	-	0.2	-	μs	IF = 20 mA, RL = 100 Ω, VCC = 5 V, CL = 100 pF
Storage Temperature	TSTG	-40	-	110	°C	-
Operating Temperature	TA	-40	-	100	°C	-

Instructions for Use:

1. Mounting:

   • Ensure that the TLP112A is mounted on a suitable PCB with proper spacing to avoid thermal issues.
   • Use appropriate soldering techniques to ensure good electrical and mechanical connections.

2. Power Supply:

   • The input forward voltage (V_F) should be within the specified range to ensure reliable operation.
   • The output collector-emitter voltage (V_CEO) must not exceed 30 V to prevent damage to the device.

3. Current Handling:

   • The input current (I_F) should be set to 20 mA for optimal performance.
   • The output collector current (I_C) should not exceed 50 mA to avoid overheating and potential failure.

4. Temperature Considerations:

   • The operating temperature (T_A) should be kept between -40°C and 100°C to ensure stable performance.
   • The storage temperature (T_STG) should be maintained between -40°C and 110°C to prevent degradation.

5. Timing Parameters:

   • The rise time (t_r) and fall time (t_f) are critical for high-speed applications. Ensure that the load resistance (RL) and capacitance (CL) are within the recommended values to achieve the specified timing characteristics.

6. Electrical Isolation:

   • The TLP112A provides electrical isolation between the input and output circuits, which is crucial for protecting sensitive components from high-voltage transients.

7. Testing:

   • Before final assembly, test the device under typical operating conditions to verify its performance and reliability.

8. Handling:

   • Handle the TLP112A with care to avoid static discharge, which can damage the internal components.
   • Use ESD-protected tools and work surfaces when handling the device.

(For reference only)