Details

---

BUY TLP627(F) https://www.utsource.net/itm/p/11545474.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.6	V	IF = 20 mA, TA = 25掳C
Reverse Breakdown Voltage	VBR	5	-	8	V	IR = 1 mA, TA = 25掳C
Output Voltage	VO	-	0.4	0.6	V	IO = 5 mA, TA = 25掳C
Output Current	IO	-	5	10	mA	VO = 5 V, TA = 25掳C
Isolation Voltage	VI	-	-	3750	Vrms	1 minute, 50/60 Hz, TA = 25掳C
Storage Temperature	TSTG	-40	-	105	掳C	-
Operating Temperature	TA	-40	-	85	掳C	-

Instructions for Use

1. Mounting:

   • Ensure the TLP627(F) is mounted on a suitable PCB with appropriate soldering.
   • Avoid excessive heat during soldering to prevent damage to the device.

2. Electrical Connections:

   • Connect the input side (anode and cathode) to the control circuit.
   • Connect the output side (collector and emitter) to the load or next stage of the circuit.

3. Forward Voltage (V_F):

   • The forward voltage should be within the specified range to ensure proper operation.
   • Exceeding the maximum forward voltage can lead to device failure.

4. Reverse Breakdown Voltage (V_BR):

   • Ensure the reverse voltage across the input does not exceed the breakdown voltage to avoid damage.

5. Output Voltage (V_O):

   • The output voltage should be monitored to ensure it remains within the specified range for reliable operation.

6. Output Current (I_O):

   • The output current should not exceed the maximum rating to prevent overheating and potential failure.

7. Isolation Voltage (V_I):

   • The isolation voltage must be maintained to ensure electrical safety and prevent short circuits between the input and output sides.

8. Temperature Considerations:

   • Operate the device within the specified storage and operating temperature ranges to ensure reliability and longevity.
   • Avoid exposing the device to temperatures outside these ranges, as it can lead to performance degradation or failure.

9. Handling:

   • Handle the TLP627(F) with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

10. Testing:

    • Before final assembly, test the device to ensure it meets the specified parameters.
    • Use a multimeter or other appropriate testing equipment to verify the forward and reverse voltages, output voltage, and output current.

(For reference only)