Details

---

BUY EL357N(C)(TA)-G https://www.utsource.net/itm/p/11545586.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	Vcc		4.5		5.5	V
Supply Current	Icc	Vcc = 5V		10		mA
Output Voltage (High)	VOH	IOL = 0.4mA, Vcc=5V	4.2		5.0	V
Output Voltage (Low)	VOL	IOH = -8mA, Vcc=5V	0.0		0.4	V
Input Voltage (High)	VIH		2.0		5.5	V
Input Voltage (Low)	VIL		0.0		0.8	V
Propagation Delay Time (Positive Edge)	tpd(P)	Vcc = 5V, Ta = 25掳C	15	20	25	ns
Propagation Delay Time (Negative Edge)	tpd(N)	Vcc = 5V, Ta = 25掳C	15	20	25	ns
Operating Temperature	Ta		-40		85	掳C
Storage Temperature	Tstg		-65		150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • The typical supply current (Icc) is 10mA at 5V.

2. Output Levels:

   • For a high output (VOH), ensure the output voltage is between 4.2V and 5.0V when the load current (IOL) is 0.4mA.
   • For a low output (VOL), ensure the output voltage is between 0.0V and 0.4V when the load current (IOH) is -8mA.

3. Input Levels:

   • The input voltage (VIH) should be between 2.0V and 5.5V for a high input.
   • The input voltage (VIL) should be between 0.0V and 0.8V for a low input.

4. Propagation Delay:

   • The propagation delay time for both positive and negative edges (tpd(P) and tpd(N)) should be between 15ns and 25ns at 25掳C and 5V supply.

5. Temperature Ranges:

   • The operating temperature (Ta) should be between -40掳C and 85掳C.
   • The storage temperature (Tstg) should be between -65掳C and 150掳C.

6. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper soldering techniques to prevent thermal stress.

7. Mounting:

   • Ensure the device is securely mounted on the PCB to maintain mechanical stability and electrical performance.

(For reference only)