Details

---

BUY MOC3011 DIP FAIRCHILD https://www.utsource.net/itm/p/11546289.html

Parameter	Symbol	Min	Typical	Max	Unit
Forward Current (IF)	IF	-	-	60	mA
Peak Forward Surge Current (IFSM)	IFSM	-	-	100	mA
Reverse Voltage (VR)	VR	-	-	600	V
Forward Breakover Voltage (VBO)	VBO	1.0	1.2	1.5	V
Forward Voltage (VF)	VF	1.0	1.2	1.5	V
Reverse Current (IR)	IR	-	-	100	nA
Trigger Current (IT)	IT	5	50	100	mA
Turn-Off Time (tOFF)	tOFF	-	-	10	渭s
Storage Temperature	TSTG	-40	-	110	掳C
Operating Temperature	TOPR	-40	-	100	掳C

Instructions for Using MOC3011 DIP FAIRCHILD:

1. Handling Precautions:

   • ESD Sensitivity: The MOC3011 is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Soldering Temperature: Do not exceed 260掳C for more than 10 seconds during soldering.

2. Mounting:

   • Ensure that the device is securely mounted on the PCB to prevent mechanical stress.
   • Use a heat sink if necessary to manage thermal dissipation, especially in high-power applications.

3. Circuit Design:

   • Input Side: Connect the input side (pins 1 and 2) to the control circuit. Ensure that the forward current (IF) does not exceed 60 mA.
   • Output Side: Connect the output side (pins 4 and 6) to the load. Ensure that the reverse voltage (VR) does not exceed 600 V.
   • Triggering: Apply the appropriate trigger current (IT) to activate the optocoupler. The typical trigger current is around 50 mA, but it can range from 5 to 100 mA.

4. Testing:

   • Forward Current Test: Measure the forward voltage (VF) across pins 1 and 2 while applying a known forward current (IF).
   • Reverse Voltage Test: Measure the reverse current (IR) while applying a reverse voltage (VR) up to 600 V.
   • Trigger Test: Apply the trigger current (IT) and verify that the output side (pins 4 and 6) switches on.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static and physical damage.

6. Safety:

   • Ensure that all electrical connections are secure and insulated to prevent short circuits and electrical hazards.
   • Follow all relevant safety standards and regulations when designing and operating circuits using the MOC3011.

By following these guidelines, you can ensure reliable and safe operation of the MOC3011 DIP FAIRCHILD optocoupler.

(For reference only)