Details

---

BUY 74ABT16245CSSCX https://www.utsource.net/itm/p/11546290.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.0		5.5	V
Output Voltage High	VOH			VCC - 0.3	V
Output Voltage Low	VOL	0.0		0.4	V
Input Voltage High	VIH	2.0		VCC	V
Input Voltage Low	VIL	0.0		0.8	V
Output Current (Source)	IOH			24	mA
Output Current (Sink)	IOL			24	mA
Propagation Delay Time	tpd		4.0	12	ns
Power Dissipation	PD			125	mW
Operating Temperature	Toper	-40		85	°C
Storage Temperature	Tstg	-65		150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals (VIH, VIL) within the specified voltage levels.
   • Ensure that input signals do not exceed the supply voltage or go below ground.

3. Output Signals:

   • The output voltage high (VOH) should be within VCC - 0.3V.
   • The output voltage low (VOL) should be no more than 0.4V.
   • Ensure that the output current (IOH, IOL) does not exceed 24mA to avoid damage.

4. Propagation Delay:

   • The propagation delay time (tpd) is typically 4.0ns but can vary up to 12ns depending on operating conditions.

5. Temperature Range:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device in a temperature range of -65°C to 150°C.

6. Handling:

   • Handle the device with care to avoid static discharge which can damage the internal components.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal damage.

7. Power Dissipation:

   • Ensure that the power dissipation (PD) does not exceed 125mW to prevent overheating and potential failure.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the specified parameters.

9. Documentation:

   • Refer to the datasheet for detailed information on pin configurations, timing diagrams, and additional specifications.

(For reference only)