Details

---

BUY IRG4PC50UPBF https://www.utsource.net/itm/p/11546292.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Maximum Drain-Source Voltage	VDS	-	500	-	V
Maximum Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current (TC = 25掳C)	ID	-	16	-	A
Continuous Drain Current (TC = 100掳C)	ID	-	9.6	-	A
Pulse Drain Current (tp = 10 渭s, IGS = 10 A)	IDpeak	-	50	-	A
Total Power Dissipation (TC = 25掳C)	PTOT	-	130	-	W
Total Power Dissipation (TC = 100掳C)	PTOT	-	78	-	W
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	1.5	-	掳C/W
Thermal Resistance, Junction to Ambient	R胃JA	-	62.5	-	掳C/W

Instructions for Use:

1. Handling Precautions:

   • ESD Protection: The IRG4PC50UPBF is sensitive to electrostatic discharge (ESD). Use proper ESD protection equipment and follow standard ESD handling procedures.
   • Storage: Store in a dry, cool place away from direct sunlight and sources of heat.

2. Mounting:

   • Heatsinking: Ensure adequate heatsinking to manage power dissipation, especially when operating at high currents or temperatures.
   • Torque Specifications: Follow the recommended torque specifications for mounting screws to avoid damage to the package.

3. Electrical Connections:

   • Gate Drive: Use a low-impedance gate drive circuit to minimize switching losses and ensure reliable operation.
   • Source Connection: Ensure a solid connection between the source terminal and the ground plane to reduce parasitic inductance.

4. Operating Conditions:

   • Temperature Management: Monitor the junction temperature to ensure it does not exceed the maximum rating. Use thermal sensors if necessary.
   • Voltage and Current Limits: Do not exceed the maximum drain-source voltage or continuous drain current ratings. Ensure that the device is operated within its safe operating area (SOA).

5. Testing:

   • Initial Testing: Perform initial testing under controlled conditions with appropriate protective measures.
   • Parameter Verification: Verify key parameters such as V_DS, I_D, and R_DS(on) to ensure the device is functioning correctly.

6. Safety:

   • Isolation: Ensure proper isolation and grounding to prevent electrical hazards.
   • Compliance: Adhere to all relevant safety standards and regulations for the application.

For detailed technical information and specific application notes, refer to the datasheet provided by the manufacturer.

(For reference only)