Details

---

BUY GT45F122 https://www.utsource.net/itm/p/11546434.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Operating Frequency	fOSC	-	30	80	MHz	Maximum operating frequency
Flash Memory Size	-	-	128	-	KB	Total flash memory size
RAM Size	-	-	16	-	KB	Total RAM size
EEPROM Size	-	-	2	-	KB	Total EEPROM size
I/O Ports	-	-	32	-		Number of general-purpose I/O pins
ADC Channels	-	-	12	-		Number of analog-to-digital converter channels
DAC Channels	-	-	2	-		Number of digital-to-analog converter channels
Timers	-	-	5	-		Number of timers/counter modules
Communication Interfaces	-	-	-	-		UART, SPI, I2C, USB
Power Consumption	-	-	0.1	5	mA/MHz	Active mode power consumption
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Package Type	-	-	-	-	LQFP-48	Leadless Quad Flat Package with 48 pins

Instructions for Using GT45F122

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Clock Configuration:

   • The device supports a maximum operating frequency of 80 MHz. Use an external crystal or internal oscillator as needed.
   • Configure the clock source using the appropriate register settings.

3. Flash Memory:

   • The device has 128 KB of flash memory. Use the provided programming tools to upload your code.
   • Follow the programming guidelines to ensure reliable code execution.

4. RAM and EEPROM:

   • Utilize the 16 KB of RAM for variable storage and program data.
   • Use the 2 KB of EEPROM for non-volatile data storage. Write operations should be limited to avoid wear-out.

5. I/O Ports:

   • Configure the 32 general-purpose I/O pins as inputs or outputs based on your application needs.
   • Use pull-up or pull-down resistors as required for stable operation.

6. ADC and DAC:

   • The 12-channel ADC can be used to read analog signals. Configure the ADC resolution and sampling rate as needed.
   • The 2-channel DAC can be used to generate analog signals. Set the output voltage using the appropriate register values.

7. Timers:

   • Use the 5 timer/counter modules for timing and counting tasks. Configure the prescaler and compare registers to achieve the desired functionality.

8. Communication Interfaces:

   • Enable and configure the UART, SPI, I2C, and USB interfaces for communication with other devices.
   • Refer to the datasheet for specific configuration details and pin assignments.

9. Power Management:

   • To minimize power consumption, use sleep modes when the device is idle.
   • Monitor the active mode power consumption to ensure it stays within the specified range.

10. Operating Temperature:

    • Ensure the device operates within the temperature range of -40掳C to 85掳C to avoid damage or unreliable performance.

11. Package Handling:

    • Handle the LQFP-48 package with care to avoid mechanical damage.
    • Follow recommended soldering and reflow profiles to ensure reliable connections.

For detailed information and advanced configurations, refer to the GT45F122 datasheet and application notes.

(For reference only)