Details

---

BUY MBR30200FCT https://www.utsource.net/itm/p/11547549.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Rated Forward Voltage	VF	-	1.1	1.7	V @ IF = 30A, TJ = 25掳C	Maximum forward voltage drop at rated current and temperature
Reverse Blocking Voltage	VRRM	1800	-	2000	V @ IF = 0A, TJ = 25掳C	Maximum reverse voltage the diode can block
Average Rectified Current	IF(AV)	-	30	-	A @ TA = 45掳C	Continuous average rectified forward current at ambient temperature
Peak Forward Surge Current	IFSM	-	300	-	A (8.3ms, sine 1/2 cycle)	Maximum peak forward surge current
Junction Temperature	TJ	-	-	150	掳C	Maximum operating junction temperature
Storage Temperature	TSTG	-65	-	150	掳C	Temperature range for storage and operation
Thermal Resistance	R胃JC	-	0.6	-	掳C/W	Junction-to-case thermal resistance
Reverse Recovery Time	trr	-	60	-	ns	Typical reverse recovery time at IF = 30A, dI/dt = 200A/渭s, TJ = 25掳C

Instructions:

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Use appropriate heat sinks to manage thermal dissipation, especially under high current conditions.

2. Electrical Connections:

   • Connect the diode in the circuit with the correct polarity. The cathode (K) is typically marked on the diode.
   • Ensure all connections are secure and free from corrosion or oxidation.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • Use thermal paste between the diode and heat sink to improve thermal conductivity.

4. Surge Current:

   • Be cautious of peak forward surge currents. Ensure that the circuit design can handle up to 300A for short durations (8.3ms, sine 1/2 cycle).

5. Reverse Voltage:

   • Do not exceed the maximum reverse blocking voltage of 2000V to prevent breakdown.

6. Storage:

   • Store the diode in a dry environment within the temperature range of -65掳C to 150掳C.

7. Testing:

   • Perform regular testing to ensure the diode is functioning correctly. Check for any signs of overheating or abnormal behavior.

8. Compliance:

   • Ensure the diode meets all relevant safety and compliance standards for your application.

(For reference only)