Details

---

BUY CD4040BM96 https://www.utsource.net/itm/p/11547581.html
IC 12BIT BIN RIPPL COUNTR 16SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	3.0	-	15	V
Input Voltage (High)	VIH	II = -10 μA	3.5	-	VCC	V
Input Voltage (Low)	VIL	II = 10 μA	0	-	1.5	V
Output Voltage (High)	VOH	IO = -1 mA	2.4	-	VCC - 0.4	V
Output Voltage (Low)	VOL	IO = 1 mA	0	-	0.4	V
Propagation Delay Time	tpd	VCC = 5V, f = 1 MHz	-	80	-	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature Range	TA	Commercial	0	-	70	°C
Storage Temperature Range	TSTG	-	-55	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 3.0V to 15V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • Apply input signals (CLK, CLR) with voltages that meet the V_IH and V_IL specifications.
   • Avoid exceeding the maximum input voltage, which should not exceed V_CC.

3. Output Handling:

   • Ensure output loads do not draw more than 1 mA to maintain the specified output voltage levels (V_OH, V_OL).
   • Use appropriate pull-up or pull-down resistors if necessary to ensure stable logic levels.

4. Propagation Delay:

   • Account for the propagation delay time (t_pd) when designing timing-sensitive circuits. The typical delay at 5V is 80 ns.

5. Thermal Management:

   • Keep the power dissipation (P_D) below 100 mW to avoid overheating.
   • Ensure adequate cooling if operating near the maximum power dissipation limit.

6. Temperature Considerations:

   • Operate the device within the commercial temperature range of 0°C to 70°C for reliable performance.
   • Store the device within the storage temperature range of -55°C to 150°C to prevent damage.

7. Handling Precautions:

   • Handle the IC with care to avoid static discharge, which can damage the device.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.

8. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.
   • Use a multimeter or oscilloscope to verify input and output signal levels.

By following these guidelines, you can ensure the proper operation and longevity of the CD4040BM96 IC.

(For reference only)