Details

---

BUY AD8615AUJZ-REEL7 https://www.utsource.net/itm/p/11548489.html

Parameter	Description	Value
Part Number	Full Part Number	AD8615AUJZ-REEL7
Package Type	Package Style	SOIC-8
Supply Voltage (VDD)	Operating Range	2.7 V to 5.5 V
Quiescent Current (IQ)	Typical at VDD = 5 V	300 渭A
Input Offset Voltage (VOS)	Maximum at 25掳C	卤50 渭V
Input Bias Current (IB)	Maximum at 25掳C	卤2 nA
Common Mode Rejection Ratio (CMRR)	Minimum at 25掳C, VDD = 5 V	100 dB
Power Supply Rejection Ratio (PSRR)	Minimum at 25掳C, VDD = 5 V	100 dB
Slew Rate (SR)	Typical at 25掳C, VDD = 5 V	0.9 V/渭s
Bandwidth (BW)	-3 dB Bandwidth at VDD = 5 V	1 MHz
Output Swing	Typical at VDD = 5 V, RL = 10 k惟	0.1 V to 4.9 V
Operating Temperature Range	Industrial Grade	-40掳C to +125掳C
Storage Temperature Range	Storage Conditions	-65掳C to +150掳C
Lead Finish	Lead Plating	Tin/Lead (Sn/Pb)
RoHS Compliance	RoHS Status	Non-RoHS Compliant

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the operating range of 2.7 V to 5.5 V.
   • Use decoupling capacitors (typically 0.1 渭F and 10 渭F) close to the power pins to minimize noise and improve stability.

2. Input Signals:

   • Keep input signals within the common mode range of the op-amp to avoid distortion or clipping.
   • Use appropriate input protection circuits if the input signals can exceed the supply rails.

3. Output Load:

   • The output can swing close to the supply rails but may not reach them exactly. Ensure the load resistance is within the specified range to maintain performance.

4. Thermal Management:

   • Place the device in areas with adequate airflow to prevent overheating, especially in high-temperature environments.
   • Consider using a heatsink if the device will be operating near its maximum temperature limit.

5. PCB Layout:

   • Follow good PCB layout practices, including short traces, proper grounding, and separation of analog and digital sections to minimize noise and interference.

6. Handling:

   • Handle the device with care to avoid damage to the leads and package.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

7. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow recommended storage conditions to ensure long-term reliability.

(For reference only)