Details

---

BUY CDSOD323-T03SC https://www.utsource.net/itm/p/11548820.html

Parameter	Symbol	Min	Typ	Max	Unit
Forward Voltage	Vf	1.8	2.2	2.6	V
Reverse Breakdown Voltage	Vr	-	5	-	V
Forward Current	If	-	20	30	mA
Peak Forward Current	Ifsm	-	100	-	mA (10ms)
Power Dissipation	Ptot	-	100	-	mW
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Thermal Resistance	Rth	-	200	-	K/W

Instructions for CDSOD323-T03SC

1. Handling and Storage:

   • Store the components in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

2. Soldering:

   • Use a soldering iron with a temperature setting between 260掳C and 300掳C.
   • Soldering time should not exceed 3 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure proper orientation of the component during mounting.
   • Avoid excessive bending of the leads, as this can cause internal damage.

4. Electrical Connections:

   • Connect the forward voltage (Vf) to the positive supply and the cathode to the negative supply.
   • Ensure that the reverse voltage does not exceed the specified breakdown voltage (Vr).

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation (Ptot).
   • Consider using a heatsink if necessary.

6. Environmental Considerations:

   • Operate the component within the specified temperature range (Topr) to ensure reliable performance.
   • Store the component within the storage temperature range (Tstg) to prevent degradation.

7. Testing:

   • Test the component under controlled conditions to verify its performance.
   • Use a multimeter to check the forward and reverse voltages.

8. Compliance:

   • Ensure that the component is used in compliance with all relevant safety and regulatory standards.

(For reference only)