Details

---

BUY MMBT3904SL https://www.utsource.net/itm/p/11549170.html

Parameter	Symbol	Value	Unit
Collector-Emitter Voltage	VCEO	40	V
Collector-Base Voltage	VCBO	60	V
Emitter-Base Voltage	VEBO	6	V
Continuous Collector Current	IC	200	mA
DC Current Gain (Min)	hFE	100	-
DC Current Gain (Max)	hFE	300	-
Transition Frequency	fT	300	MHz
Power Dissipation	PD	310	mW
Operating Temperature Range	TA	-55 to 150	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the MMBT3904SL with care to avoid damage to the leads or body.
   • Use anti-static wrist straps and mats to prevent electrostatic discharge (ESD).

2. Mounting:

   • Ensure proper alignment of the leads during soldering to avoid mechanical stress.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the device to cool naturally after soldering.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) according to the circuit diagram.
   • Ensure that the voltage and current ratings are not exceeded to prevent damage.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static and physical damage.

5. Testing:

   • Use a multimeter to check for continuity and resistance between the leads.
   • Test the device in a controlled environment to ensure it meets the specified parameters.

6. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Verify that the device is within its operational limits and not overheating.

(For reference only)