Details

---

BUY ZXMP6A17G https://www.utsource.net/itm/p/11552124.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	2.5	-	5.5	V
Output Voltage	V_OUT	-	3.3	-	V
Output Current	I_OUT	-	500	600	mA
Quiescent Current	I_Q	-	2.5	-	渭A
Dropout Voltage	V_DROPOUT	-	250	-	mV
Load Regulation	-	-	1%	-	%
Line Regulation	-	-	0.2%	-	%
Ripple Rejection	-	-	60	-	dB
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_STG	-65	-	150	掳C

Instructions for ZXMP6A17G

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 2.5V to 5.5V. Exceeding this range can damage the device.

2. Output Voltage (V_OUT):

   • The output voltage is fixed at 3.3V. No external components are required to set this voltage.

3. Output Current (I_OUT):

   • The device can provide up to 600mA of output current, with a typical current of 500mA. Ensure the load does not exceed these limits to avoid overheating or damage.

4. Quiescent Current (I_Q):

   • The quiescent current is typically 2.5渭A. This low current consumption makes the device suitable for battery-powered applications.

5. Dropout Voltage (V_DROPOUT):

   • The dropout voltage is typically 250mV. This means the input voltage must be at least 250mV higher than the output voltage to maintain regulation.

6. Load Regulation:

   • The load regulation is typically 1%, indicating that the output voltage will change by 1% when the load current changes.

7. Line Regulation:

   • The line regulation is typically 0.2%, indicating that the output voltage will change by 0.2% when the input voltage changes.

8. Ripple Rejection:

   • The ripple rejection is typically 60dB, which means the device can effectively filter out input voltage ripples.

9. Operating Temperature (T_OP):

   • The device operates reliably within the temperature range of -40掳C to 85掳C. Ensure the ambient temperature is within this range to avoid performance degradation.

10. Storage Temperature (T_STG):

    • The device can be stored in temperatures ranging from -65掳C to 150掳C without damage.

11. Mounting and Handling:

    • Handle the device with care to avoid static discharge. Follow proper ESD (Electrostatic Discharge) precautions.
    • Mount the device on a PCB using recommended soldering profiles to ensure reliable connections.

12. Capacitors:

    • Use recommended input and output capacitors to stabilize the circuit. Typically, a 1渭F ceramic capacitor is used for both input and output.

13. PCB Layout:

    • Place the device close to the load to minimize trace resistance and inductance. Keep the ground plane solid and wide to improve thermal dissipation.

By following these parameters and instructions, you can ensure optimal performance and reliability of the ZXMP6A17G in your application.

(For reference only)