Details

---

BUY CD1376C https://www.utsource.net/itm/p/11552223.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5.0	5.5	V
Supply Current	Icc	Operating, No Load	-	10	20	mA
Output Voltage (High)	VOH	IO = -100 渭A	4.5	4.8	5.0	V
Output Voltage (Low)	VOL	IO = 100 渭A	0.0	0.2	0.4	V
Input Voltage (High)	VIH	-	2.0	3.5	5.0	V
Input Voltage (Low)	VIL	-	0.0	1.5	2.0	V
Propagation Delay Time (Positive Edge)	tpd(HL)	Vcc = 5V, CL = 15pF	10	15	20	ns
Propagation Delay Time (Negative Edge)	tpd(LH)	Vcc = 5V, CL = 15pF	10	15	20	ns
Power Dissipation	PD	-	-	-	100	mW
Operating Temperature Range	Topr	-	-40	25	85	掳C
Storage Temperature Range	Tstg	-	-65	-	150	掳C

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage or malfunction.

2. Supply Current:

   • The typical supply current is 10mA, but it can go up to 20mA under operating conditions.

3. Output Voltage:

   • For high output, ensure the voltage is at least 4.5V when sourcing 100 渭A.
   • For low output, ensure the voltage is no more than 0.4V when sinking 100 渭A.

4. Input Voltage:

   • For a high input, the voltage should be between 2.0V and 5.0V.
   • For a low input, the voltage should be between 0.0V and 2.0V.

5. Propagation Delay:

   • The propagation delay time for both positive and negative edges should be within 10 to 20 nanoseconds when the load capacitance is 15pF and the supply voltage is 5V.

6. Power Dissipation:

   • The maximum power dissipation should not exceed 100mW to prevent overheating.

7. Operating and Storage Temperature:

   • The operating temperature range is from -40掳C to 85掳C.
   • The storage temperature range is from -65掳C to 150掳C.

8. Handling:

   • Handle the CD1376C with care to avoid static discharge, which can damage the component.
   • Use appropriate ESD protection measures during handling and installation.

9. Mounting:

   • Ensure proper mounting to maintain good thermal and electrical connections.
   • Follow the recommended PCB layout guidelines to minimize noise and interference.

10. Testing:

    • Test the component under the specified operating conditions to ensure it meets the performance specifications.

(For reference only)