Details

---

BUY TLP250(F) https://www.utsource.net/itm/p/11553157.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.5	5.0	5.5	V	-
Input Forward Voltage	VIF	-	1.2	-	V	IF = 10 mA
Input Current	IF	-	10	-	mA	VIF = 1.2 V
Output Saturation Voltage	VCE(sat)	-	0.3	-	V	IC = 100 mA, VCC = 5 V
Output Leakage Current	ICEO	-	10	-	渭A	VCE = 5 V, IF = 0 mA
Propagation Delay Time	tpd	-	100	-	ns	VCC = 5 V, IF = 10 mA, RL = 300 惟
Rise Time	tr	-	50	-	ns	VCC = 5 V, IF = 10 mA, RL = 300 惟
Fall Time	tf	-	50	-	ns	VCC = 5 V, IF = 10 mA, RL = 300 惟
Operating Temperature Range	Top	-40	-	85	掳C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5 to 5.5 V.

2. Input Signal:

   • Apply the input current (I_F) to the input pin. The typical value is 10 mA.
   • The input forward voltage (V_IF) should be around 1.2 V when I_F = 10 mA.

3. Output Configuration:

   • Connect the load resistor (R_L) between the output pin and ground.
   • The output saturation voltage (V_CE(sat)) should be less than 0.3 V when the output current (I_C) is 100 mA and V_CC is 5 V.

4. Timing Parameters:

   • The propagation delay time (t_pd) is typically 100 ns.
   • The rise time (t_r) and fall time (t_f) are both typically 50 ns.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Ensure proper heat dissipation if operating at high currents or temperatures.

7. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.

By following these parameters and instructions, you can ensure reliable operation of the TLP250(F) optocoupler.

(For reference only)