Details

---

BUY NGTB75N60FL2WG 75N60FL TO-247 600V 75A IGBT https://www.utsource.net/itm/p/11553293.html

Parameter	Symbol	Value	Unit	Conditions
Collector-Emitter Voltage	V CES	600	V
Collector Current	I C	75	A	Tc = 25°C
Collector Current	I CM	130	A	Pulse, t=10ms, Tc = 25°C
Emitter-Base Voltage	V EBS	20	V
Base-Emitter Voltage	V BE(on)	4.5	V	IC = 75A, Tc = 25°C
Turn-On Time	t on	0.18	μs	IC = 75A, VGE = 15V
Turn-Off Time	t off	0.29	μs	IC = 75A, VGE = -15V
Total Switching Loss	E TS	1.7	mJ	IC = 75A, f = 10kHz
Power Dissipation	Ptot	260	W	TC = 25°C
Junction Temperature	T J	-40 to 150	°C
Storage Temperature	T STG	-55 to 150	°C

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Handle with care to avoid damage to the pins and body.

2. Mounting:

   • Ensure proper heat sinking when mounting to maintain junction temperature within specified limits.
   • Tighten the mounting screw to the recommended torque to ensure good thermal contact.

3. Electrical Connections:

   • Verify all connections are secure and correct before applying power.
   • Ensure that the gate drive circuit can provide sufficient voltage and current for reliable switching.

4. Operational Considerations:

   • Keep the junction temperature below the maximum limit to prevent overheating.
   • Monitor the collector-emitter voltage and collector current to ensure they do not exceed rated values.

5. Safety Precautions:

   • Always use appropriate safety equipment when handling high voltages.
   • Follow all guidelines provided by the manufacturer to ensure safe operation.

6. Testing:

   • Perform initial testing at reduced voltages and currents to verify correct operation.
   • Regularly inspect the device for signs of wear or damage.

7. Environmental Concerns:

   • Dispose of any defective units according to local regulations.
   • Be aware of the environmental impact of materials used and handle accordingly.

(For reference only)