Details

---

BUY TIP41C TIP41 TO-220 NPN FAIRCHILD https://www.utsource.net/itm/p/11553308.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	60	V	IC = 0, TA = 25掳C
Collector-Base Voltage	VCBO	-	-	80	V	IE = 0, TA = 25掳C
Emitter-Base Voltage	VEBO	-	-	7	V	IC = 0, TA = 25掳C
Collector Current	IC	-	-	6	A	TC = 25掳C
Base Current	IB	-	-	1	A	TC = 25掳C
Power Dissipation	PTOT	-	-	65	W	TC = 25掳C
Junction Temperature	TJ	-	-	150	掳C	-
Storage Temperature	TSTG	-55	-	150	掳C	-
Thermal Resistance	R胃JC	-	2	-	掳C/W	Junction to Case
Transition Frequency	fT	-	3	-	MHz	IC = 150mA, VCE = 10V
DC Current Gain	hFE	15	75	300	-	IC = 150mA, VCE = 10V

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking if operating near maximum power dissipation.
   • Use a mica or thermal pad between the transistor and heat sink to prevent electrical shorts.

2. Biasing:

   • The base-emitter voltage (V_BE) is typically around 0.7V when forward-biased.
   • Ensure the base current (I_B) is sufficient to fully saturate the transistor for switching applications.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table to avoid damage to the device.
   • Monitor the junction temperature (T_J) to ensure it stays within safe limits.

4. Storage:

   • Store the transistor in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical stress or static discharge.

5. Testing:

   • Use a multimeter to check for continuity and correct polarity before installing in a circuit.
   • Test the transistor in a controlled environment to verify its performance parameters.

6. Soldering:

   • Use a low-wattage soldering iron to avoid overheating the device.
   • Ensure the leads are clean and free of oxidation before soldering.

7. Applications:

   • Suitable for general-purpose amplification and switching applications.
   • Ideal for driving loads such as relays, motors, and LEDs.

(For reference only)