Details

---

BUY SVF12N65F 12N65 12A650V MOSTO220F https://www.utsource.net/itm/p/11553322.html

Parameter	Symbol	Value	Unit
Maximum Drain Current	ID	12	A
Drain-Source Breakdown Voltage	BVdss	650	V
Gate-Source Voltage	Vgs	卤20	V
Continuous Drain Current	ID	12	A
Power Dissipation	Ptot	180	W
Junction Temperature	Tj	-55 to +175	掳C
Storage Temperature	Tstg	-55 to +150	掳C
Total Gate Charge	Qg	95	nC
Input Capacitance	Ciss	3300	pF
Output Capacitance	Coss	870	pF
Reverse Transfer Capacitance	Crss	650	pF
On-State Resistance	Rds(on)	0.55	惟
Gate Threshold Voltage	Vth	4.0 to 5.0	V

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a suitable heatsink to maintain the junction temperature within the specified limits.
   • Use thermal grease or a thermal pad to enhance heat transfer between the device and the heatsink.

2. Electrical Connections:

   • Connect the drain (D) to the high-voltage side of the circuit.
   • Connect the source (S) to the low-voltage side of the circuit.
   • Connect the gate (G) to the control circuit, ensuring proper isolation to avoid short circuits.

3. Gate Drive:

   • Apply a gate voltage (Vgs) of at least 10V to fully turn on the MOSFET.
   • Use a gate resistor to limit the current and prevent oscillations.

4. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from transient voltages exceeding the BVdss rating.

5. Thermal Management:

   • Monitor the junction temperature and ensure it does not exceed 175掳C.
   • Use forced air cooling or a larger heatsink if necessary to maintain optimal operating temperatures.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Handle with care to avoid mechanical damage and electrostatic discharge (ESD).

7. Testing:

   • Before installing the device in a circuit, test its parameters using a multimeter or a dedicated MOSFET tester to ensure it meets the specifications.

8. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) and ensure the workspace is well-ventilated.

(For reference only)