Details

---

BUY 30JL2C41 https://www.utsource.net/itm/p/11553802.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating voltage range
Output Voltage	VOUT	-	3.3	-	V	Regulated output voltage
Output Current	IOUT	-	300	-	mA	Maximum continuous output current
Quiescent Current	IQ	-	2.5	-	渭A	Supply current at no load
Dropout Voltage	VDROPOUT	-	200	-	mV	Voltage difference between VIN and VOUT at IOUT
Load Regulation	-	-	1	-	%	Change in VOUT for change in IOUT (from 0 to IOUT)
Line Regulation	-	-	0.01	-	%/V	Change in VOUT for change in VIN
Ripple Rejection	-	-	60	-	dB	Ability to reject input ripple
Operating Temperature	Toper	-40	-	85	掳C	Ambient temperature range for operation
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage
Package	-	-	-	-	SOT-23-5	Package type

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the appropriate pin of the 30JL2C41.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Configuration:

   • The output voltage (VOUT) is fixed at 3.3V. No external resistors are required for voltage setting.

3. Load Connection:

   • Connect the load to the output pin (VOUT). Ensure the load current does not exceed 300mA to avoid overheating or damage.

4. Capacitor Requirements:

   • Place a 1渭F ceramic capacitor close to the input pin (VIN) to stabilize the input voltage.
   • Place a 1渭F ceramic capacitor close to the output pin (VOUT) to filter the output and maintain stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation, especially when operating at high output currents or in high ambient temperatures.
   • The device is designed to operate within the temperature range of -40掳C to 85掳C. Avoid exceeding these limits to prevent damage.

6. Storage:

   • Store the device in a dry environment within the temperature range of -65掳C to 150掳C to ensure long-term reliability.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)