Details

---

BUY BYV34-500 https://www.utsource.net/itm/p/11553803.html

Parameter	Value
Type	Schottky Diode
Maximum Reverse Voltage (VR)	500 V
Maximum Forward Current (IF)	3 A
Peak Forward Surge Current (IFSM)	80 A
Forward Voltage (VF) at IF = 1 A	0.65 V
Reverse Current (IR) at VR = 500 V	1 渭A
Thermal Resistance, Junction to Case (Rthjc)	10 K/W
Operating Temperature Range (TJ)	-65掳C to +175掳C
Storage Temperature Range (Tstg)	-65掳C to +175掳C
Package	TO-220AB

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within the specified range.
   • Use thermal grease or a thermal pad between the diode and the heatsink for better thermal conductivity.

2. Soldering:

   • Preheat the diode to avoid thermal shock.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the diode to cool naturally after soldering.

3. Electrical Connections:

   • Connect the anode to the positive side of the circuit and the cathode to the negative side.
   • Ensure that the maximum reverse voltage is not exceeded to prevent breakdown.

4. Surge Current Handling:

   • The diode can handle peak forward surge currents up to 80 A, but ensure that these surges are brief and infrequent to avoid damage.

5. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and corrosive environments.
   • Handle with care to avoid mechanical damage.

6. Safety:

   • Always use appropriate personal protective equipment (PPE) when handling and soldering the diode.
   • Follow all relevant electrical safety guidelines and regulations.

(For reference only)